Binks 2001 spray gun manual

Binks 2001 spray gun manual

ITW BINKS 6999 SB-E- A6-76. Items shown on parts list by * ITW BINKS 6999 SB-E- A6-76. 68 79 97 NEEDLE ADJUSTING NUT 68 88 68 NEEDLE ASSY Recommended spares kit with quantities based on 67 months supply with meduim wear materials 75 57 58. Smoking and naked flames must not be allowed in the spraying or mixing areas. MODE - Disconnect supply hose at Fluid Inlet, reconnect a supply of clean solvent. Work stations must be provided with adequate ventilation/exhaust to prevent the build-up of flammable vapours. MAINTENANCE FAULT FINDING CLEANING GUN USED WITH SYPHON CUP OR MATERIAL SUPPLY HOSE CUP - Unscrew the cup empty and rinse out carefully with thinners, place clean thinners in the cup and spray this through the gun until it is clean, then blow air through the gun to dry it. SAFETY WARNINGS FIRE AND EXPLOSION Solvents and coating materials can be highly flammable or combustible, especially when sprayed.

(always read instructions supplied with pressure cup prior to use). Air pressure to the gun should be regulated in line after the pressure cup.